Call +1 (754) 240-5850

Free tool for installers & DIY

CCTV storage & PoE calculator

Enter your cameras and how long you need to keep footage. You get the hard drive size, NVR bandwidth, PoE power budget and the switch and NVR size to match.

Step 1

Your cameras

Recording

Motion-only recording? Set hours per day to roughly how long there is activity (often 6–10 hours).

Your system

Storage needed
17.1 TB
1 × 20TB surveillance HDD
Recording bandwidth
48 Mbps
NVR rated for 60+ Mbps incoming
PoE power budget
80 W
64 W draw + 25% headroom
Switch & NVR
8-port
8-channel NVR, 8 cameras

Estimates based on typical H.265 bitrates. Busy scenes, night noise and higher quality settings use more. Check the camera and NVR datasheets before you buy.

Step 2

Get a quote for this system

How the CCTV storage formula works

Storage depends on the total bitrate of your cameras and how long you keep footage:

Storage (TB) = total bitrate (Mbps) × 3,600 × hours per day × days ÷ 8 ÷ 1,000,000

Multiplying by 3,600 turns seconds into hours, dividing by 8 turns megabits into megabytes, and dividing by 1,000,000 turns megabytes into terabytes. The calculator adds 10% for file overhead, then rounds up to standard drive sizes.

Worked example

Eight 4K cameras at about 6 Mbps each (H.265, 15 fps) stream 48 Mbps in total. Recording 24 hours a day for 30 days: 48 × 3,600 × 24 × 30 ÷ 8 ÷ 1,000,000 ≈ 15.6 TB, or about 17 TB with overhead.

What changes the result

  • Codec: H.264 needs roughly 1.8× the storage of H.265 for the same picture.
  • Frame rate: storage scales with fps, so 30 fps needs about twice what 15 fps does.
  • Motion-only recording: recording only on events can cut storage sharply on quiet cameras.
  • Scene and night noise: busy scenes and grainy night video raise the real bitrate.

How to size a PoE switch →microSD cards for cameras →Best Reolink cameras →PoE camera systems →